Large Heavy Duty Christmas Tree Stands

All stands in this category are manufactured from heavy-duty steel in the USA. The steel construction provides substantial ballast, with stand weights ranging from 30 pounds for 12-foot models up to 107 pounds for the 30-foot model. This rigid construction prevents bending, cracking, or toppling under substantial tree weight.

The water reservoir capacity varies by model to match tree hydration requirements. The 10XTS model holds 2.25 gallons, the 12XTS model holds 4 gallons, and the large 16XTS model holds 6.5 gallons. These self-contained reservoirs ensure tall cut trees maintain adequate water intake without requiring constant refilling.

Trunk preparation depends on the stand model selected. For the 10XTS model, drill a 1/2-inch diameter hole approximately 2 inches deep in the bottom center of the trunk. For the larger 16XTS model, drill a 1-inch diameter hole approximately 2 inches deep to seat the tree over the center pin securely.

The stands are designed with heavy steel to act as a stabilizing counterweight. The 10XTS models weigh 30 pounds, the intermediate 12XTS model weighs 66 pounds, and the 16XTS model designed for 30-foot trees weighs 107 pounds. This built-in weight ensures tall, heavy cut trees remain upright.

The 16XTS package comes with the main steel bowl, four extended stabilizing legs, and four heavy-duty T-handles. Some assembly is required upon delivery. Once assembled, the four T-handles tighten against the trunk to straighten and secure trees up to 30 feet tall.

Yes, setup support is available across the product range. Setup instructions are provided for the 10XTS, 12XTS, and 16XTS models. Additionally, setup demonstration videos are available for the 6XTS, 8XTS, and 10XTS models to guide users through drilling the trunk and tightening the T-bolt handles.