Plastic Christmas Tree Trays and Platters

The listed combinations support trees up to 7, 9, or 12 feet, depending on the model. The 6XTS supports trees up to 7 feet, the 8XTS supports trees up to 9 feet, and the 10XTS supports trees up to 12 feet. Select a configuration based on the intended tree height and the setup requirements for that model.

Yes. The listed products are stand-and-mat combinations, and each includes a 48-inch mat. The product information identifies the mat diameter but does not specify its material. The mat is included with the corresponding 6XTS, 8XTS, and 10XTS stand configurations.

The stands use T-handles or T-bolt handles to help straighten and secure the tree. The 6XTS includes three T-handles, while the 10XTS is described as using three T-bolt handles. The 8XTS includes a patented T-bolt design described as easier to turn than traditional stand screws.

Yes. The listed combinations feature self-containing water reservoirs. The 8XTS has a stated capacity of 1.2 gallons, while the 6XTS information describes a self-containing reservoir without specifying one fixed capacity. Water capacity and other specifications should be confirmed for the selected model.

Setup requirements vary by model. The 6XTS and 10XTS information states that the tree trunk requires a 1/2-inch-diameter hole approximately 2 inches deep in the bottom centre. T-handles are then used to straighten and secure the tree. Setup instructions and a video resource are available for specified models.

The product information identifies the 8XTS and 10XTS as made in the USA, and the company describes itself as a family-owned American manufacturer of steel Christmas tree stands. Bowling's Last Stand began manufacturing in 1989 and continues producing its stand range in the USA.