12XTS Christmas Tree Stand
For trees up to 20 feet. Two story foyers, great rooms, churches and shops.
Plus $85 shipping. Alaska and Hawaii, please call.
Call (231) 864 2653 or toll free (888) 556 4673.
- Most orders ship within 24 hours from Bear Lake, Michigan
- Order by phone. We confirm your size, shipping and total before you pay
- Questions before you buy? Call (231) 864 2653
Built for two story foyers, great rooms, churches and storefronts. Four removable steel legs spread the load of a tree up to 20 feet, and the bowl holds 4 gallons of water.
The 12XTS ships as nine parts: the steel bowl, 4 T bolts and 4 legs. You fit the bowl to the trunk while the tree lies on the floor, bolt on two legs, stand the tree up and add the other two. The legs come off again for storage.
- Holds trees up to
- 20 feet
- Bowl diameter
- 12 inches
- T bolts
- 4
- Water capacity
- 4 gallons
- Weight
- 66 pounds
- Legs
- 4 steel legs, removable
- Drill bit needed
- 1 inch
- Assembly
- Some
See the 12XTS and 16XTS set up
Drill a 1 inch hole about 2 inches deep in the center of the trunk. Fit the stand while the tree is on its side, tighten the T bolts, then stand it up.
Step by step instructionsWorks like a charm
For years, we've struggled to get our 16 foot tree up and steady. We've usually had to tie it off to the banister to make sure it didn't fall down. Yes, this stand is expensive. But it got the tree up this year first time with no problems and no need to tie it off.
Last stand you will ever buy
They mean it. I put a 15 foot Fraser in it every year with a huge trunk and it stands straight up without being tied and with no worries of it ever tipping over. Holds 4 gallons of water! Huge investment, but I no longer have to worry if my tree will fall over.
Ours has lasted 15 years and counting
Durable, leak proof, sturdy, easy to use. Your tree will never tip over and it holds lots of water, so you do not have to keep worrying whether the tree is getting enough. We've had ours for 15 plus years and our children are already fighting over who will inherit it.
12XTS questions
Will the 12XTS fit my tree?
It holds trees up to 20 feet tall. The bowl is 12 inches wide. If your tree is right at the limit or has a very thick trunk, look at the 16XTS.
What tools do I need?
A drill with a 1 inch bit. You also need a 3/4 inch open end wrench to bolt on the legs.
How long will it last?
Customers have used the same stand for 15 years and more, and many plan to pass theirs down. It is welded steel with no plastic parts to crack.
